Page 3 sur 3
Re: Zeiss Stemi DV4... à suivre - [ebay.de]
Posté : 02 nov. 2013 21:47
par Maraussan
Voui...
Mais si les molettes en plastique cassent, BelOMO n'y est pour rien, c'est un défaut de conception, et de simplification à outrance de certains composants chez Zeiss (et autres).
Re: Zeiss Stemi DV4... à suivre - [ebay.de]
Posté : 02 nov. 2013 21:55
par Fredlab
Hello
Maraussan a écrit :Mais si les molettes en plastique cassent, BelOMO n'y est pour rien, c'est un défaut de conception, et de simplification à outrance de certains composants chez Zeiss (et autres).
C'est une question de cahier des charges... honte à Zeiss
(vu le prix qu'ils vendent leur camelote, ça leur coûte quoi de mettre des plastiques qui tiennent la route ?)
Re: Zeiss Stemi DV4... à suivre - [ebay.de]
Posté : 03 nov. 2013 21:58
par PROVENCE
Bonsoir,
Savez vous comment la molette a cassée avant de critiquer?
Cordialement
Claude
Re: Zeiss Stemi DV4... à suivre - [ebay.de]
Posté : 05 nov. 2013 18:26
par G4Lab
Very Interesting photograph, indeed!!!
I had thought ,, that the lowest price Zeiss scopes were built by Motic. It is possible the optics come from Motic and the stands from Belomo. I have one such stand at work and will look for an origin label on it. I will report back later.
Both Belomo and Motic are capable of excellent quality. But I agree. Zeiss charges too much to put their name on a plastic inexpensive scope. I feel the same way about he Stemi 1000 and 2000 scopes. The 2000 s I have examined do not say "Made in Germany" on them.
Usually European , American and Japanese made products brag about their origin. Sneaky mislabeled ones do not
The one we have is also made in Belarus. The picture shows lots of stands and no optical heads. It think those come from Motic.
Re: Zeiss Stemi DV4... à suivre - [ebay.de]
Posté : 18 nov. 2013 22:39
par G4Lab
Plastic gears and wheels can be almost as good as metal. If they are correctly designed.
In the late 1980s Wild Heerbrugg started using plastic focusing racks on their Stereo microscopes.
I have serviced a large number of these that were in student university service for twenty years. They have worked very well.
I was very concerned when they first came out. They replaced stainless steel posts and ball bearing slides. But I have to admit they work pretty well. Even twenty five years later.
Of course so have the M5 s we have that were made in 1966. If the lubricants were not allowed to solidify they all still work very well.
Almost FIFTY years later.